New Star Software Collection/NSS_Collection.iso/3-070 recognita plus 20/1.ima/SETUPD.MES

Text File | 1993-02-10 | 5KB | 116 lines

001#.E
000EEnglish$Do you speak English? Press key "E"
001 Installation
002 Modification
003 Exit to DOS
004 Press <ENTER> to select the highlighted function
005 Use , , <HOME>, <END> to move the highlight bar to your choice
006 Press <ESC> to return to the menu
007 Use <PGUP>, <PGDN>, , , <HOME>, <END> to scroll the text
008 Enter the serial number of your RECOGNITA PLUS, then press <ENTER>
009 You appear to have an unauthorized copy of RECOGNITA PLUS.
011 Source drive and path:
012 Edit target drive and path (if needed), then press <ENTER>
013 Target drive and path:
014 Source path does not exist or source drive is not ready
015 Cannot access or create target path
035 Cannot access or create RECUSER path
016 Cannot access target path
036 Cannot access RECUSER path
024 Installation can only be performed to an empty directory
017 Is the path above correct? (y/n):
018 YN
019%Checking files, please wait a bit...
028 The complete RECOGNITA PLUS system requires about %s Mbytes of disk space.
-"- There is not so much free space on the target disk,
-"- it may not be possible to finish installation.
020 Press any key to continue
021 Insert RECOGNITA PLUS diskette %i/%i in drive %c
022 Insert RECOGNITA PLUS demo diskette %i/%i in drive %c
023 Insert RECOGNITA PLUS tutor diskette %i/%i in drive %c
025 Copying
026 Decompressing
027 The following document files are available:
029 Return to main menu
030@The following languages can be chosen to be used by SETUP:
031 The following message files can be chosen for MS/PC-DOS mode:
033 Message files are missing, RECOGNITA PLUS cannot work without them!
038 do not change
045 If you have a display type other than those below,
-"- select a mode which is compatible with your display
-"- and don't forget to set this mode before using RECOGNITA PLUS
048 The following display modes can be chosen:
050 Which type is compatible with your machine?
051 The following scanners can be chosen:
052 without scanner
054 The following types of %s scanners can be chosen:
056 The address of the interface card has to be a multiple of hex %X
058 in the range of hex %4.4X - %4.4X
060 The address of the interface card has to be hex
061
062 This address may not be applicable. Are you sure? (y/n):
063 Enter the address or press only <ENTER> to use hex %4.4X:
064 The interrupt level of the interface has to be in the range of hex %2.2X - %2.2X
065 Enter the interrupt level or press only <ENTER> to use hex %2.2X:
066 Press <ENTER> to select the highlighted transfer method
067 RECOGNITA PLUS requires the following line in the %s file:
069 where <path> is the current path to the %s scanner driver file.
071 Primary address = %s
072 RECOGNITA PLUS requires also a file named %s in the same directory where %s is.
075 Use the %s program(s) shipped with the scanner to set all the above correctly.
078 Use the installation guide shipped with the scanner.
079 You have chosen the %s %s scanner.
081 Are you sure you want to use a %s %s scanner on your IBM %s?
085 It is possible it will not work on this machine.
086 See the remarks in the manual "Scanners supported by RECOGNITA PLUS"
-"- or in the README.DOC file.
088 Messages
091 Display
092 Scanner
093 port address
094 channel
095 non-DMA
096 vector
097 adf
098 yes
099 Are the settings above correct? (y/n):
100 You can modify any entries selected previously
101 Press <ENTER> to select the highlighted item
102 Overview document files
103 Language of the messages to be used by SETUP
104 Language of the messages to be used by RECOGNITA PLUS
106 Display mode
107 Scanner type
108 File %s is missing,
110 RECOGNITA PLUS cannot work without it!
111 File %s has an illegal structure!
112 Don't forget to install your %s interface card.
114 Set the DIP switches on the card as follows:
115 Set the jumpers on the card as follows:
116 Is an Automatic Document Feeder (ADF) connected to your scanner? (y/n):
117 If you install a mouse, RECOGNITA PLUS will be much more convenient to use.
118 RECOGNITA PLUS cannot work unless all the above instructions have been followed.
120 File %s not found.
121 You can insert the %s directory in the PATH variable in the %s file
-"- to start RECOGNITA PLUS from any directory in your system.
122 SETUP can insert the %s directory in the PATH variable in the %s file
-"- to start RECOGNITA PLUS from any directory in your system.
141 There is not enough space in the PATH variable to insert the %s directory.
-"- Use the DOS command SUBST in the AUTOEXEC.BAT file to shorten the
-"- long directory names in the PATH by substituting them with drive names.
-"- Set the LASTDRIVE parameter in the CONFIG.SYS file to the last letter
-"- you have used in the SUBST commands.
125 There is not enough space in the environment to insert the %s directory
-"- in the PATH variable.
127 SETUP can increase the environment by inserting
-"- the following line in the %s file:
129 The original %s will be copied to %s
131 Do you want to let SETUP make the above modifications? (y/n):
132 These modifications will take effect only after you have rebooted the system.
133 You are advised to make the above modifications manually.
134 Modification of %s was not successful.
136 You can start RECOGNITA PLUS by the following commands:
137"MS/PC-DOS mode:            .
140"for visually handicapped:  .
199 The setup process of RECOGNITA PLUS is completed.